FALLSOFT® SAFETY EQUIPMENT
FOR USE ON
UTILITY TRANSFORMERS, CIRCUIT BREAKERS & SWITCHES

If it's

Anchor Bases, Anchorage Connectors, Retrieval/Rescue Booms, Step Assemblies, Winches

Fallsoft® has it all

Lightweight, easy to use & portable

GM200A Anchorage connector mounted in GM135CP bolt down base & anchored to existing 1” mounting studs found on Waukesha Transformers

GM200A Description General Specifications Application Restrictions • 3 person swivel tie-off provision at top of vertical post. • Vertical post has built-in shock absorbing qualities. • Tie-off height is 75” (1.9m) from walking surface. • Locks into anchor base plates with 2 locking pins. • Lightweight. • User Friendly. • c/w carry handle. • Vertical structure does not rotate when used. • May be converted to a 16”/30” (40.8 cm/ 76.5 cm) reach davit arm by adding GM193 boom kit. • Maximum working load 350 lbs. (158.9 kg.) per person. • Maximum M.A.F. rating of retractables or tear-out shock absorbers 900 lbs. (4kN). • Tested to static load pull of 3600 lbs. (16.2kN) at 45 degrees. • Weight 26 lbs. (11.7 kg). • Rotation of 3 person tie off plate: 360 degrees. • General construction: extruded aluminum. • Tubular components: 6061-T6 Aluminum. • Tie-Off: zinc plated. • Hardware: grade 5 steel zinc plated. • Finish: natural aluminum or powder coated safety yellow. • Inspect structure for structural defects prior to use. • Use with GM type anchor bases. • Personnel must be connected with a shock absorbing lanyard or self-retracting lifeline with a maximum arrest force not exceeding 900 lbs. (4 kN). • Personnel must use a full body harness. • Support structure must withstand applied loads. GM200A Maintenance instructions (Click To Download)

PRODUCT APPLICATION PICTURES GM200A Anchorage Connector mounted in GM135CP bolt down base & anchored to existing 1” mounting studs found on Waukesha Transformers GM200A Anchorage connector mounted in GM135 weld on plate RETRIEVAL AND/OR RESCUE APPLICATIONS GM200A Anchorage Connector with GM193 adjustable boom kit and GM907FT winch for retrieval & rescue. GM193 Description General Specifications Application Restrictions • 4 variable offset positions 16” (408mm), 20” (510mm), 25” (637mm), 30” (765mm). • 2nd fixed connection points a minimum of 70” (1.78m) from walking surface. • 1 fixed bracket connection for connection of RSRL or winch. • 2 RSRL/winch mount available with the use of a GM 198 Boom Kit. • capable of 360 degree rotation around the vertical anchor post. • Quick and easy to install . • Maximum working load of 350 lbs. (157 kg) per person. • Rated for fall arrest load of 2 users – maximum M.A.F. rating of retractables or tear-out Shock absorbers 900 lbs. (4kN) per person. • Weight 18lbs. (8.1 kg). • Constructed of 6061-T6 aluminum. • Tie off plates: zinc plated steel • Finish:natural aluminum or powder coated safety yellow. • To be used with approved applicable retrieval winch or SRL. • Personnel must use a full body harness.   GM193 Boom Kit with single winch mount GM193 & 198 Boom Kit with double winch mount WINCH MOUNTED TO GM193 BOOM KIT

• Continuous brake holds load in place when raising & lowering therefore preventing free wheeling of drum when crank handle is released.

• Double braking system.

• Double pawl primary brake on drive shaft.

• Centrifugal secondary brake on drum which activates only on failure of primary brake & free-wheeling of drum.

• Secondary braking system is c/w shock absorbing mechanism.

• Double pulley cable guide allows correct placement of cable on drum.