Fallsoft® - Work Positioning / Anchorage Connector

General - GM200A

  • 3-person swivel tie-off provisions at top of vertical post.
  • Vertical post has built-in shock absorbing qualities.
  • Tie-off height is 75" (1.9 m) from walking surface.
  • Locks into anchor base plates with 2 locking pins.
  • Lightweight.
  • User friendly.
  • Integrated carry handle.
  • Vertical structure does not rotate when in use.
  • May be converted into a 16"/30" (40.8 cm/76.5 cm) reach davit arm by adding a GM193 Adjustable Boom Kit.
  • Meets all requirements of fall protection systems in 29 CFR OSHA 1918.85(k).
  • Tested in accordance with ANSI Z359.1-1992 (R1999) & EN795:2012.
  • CE certified.

Specifications

  • Maximum working load: 350 lbs (158.9 kg) per person.
  • Maximum Arrest Force (M.A.F.) rating of retractables or tear-out shock absorbers 900 lbs (4 kN) per person.
  • Tested to static load pull of 2,000 lbs (8.9 kN) at 45°.
  • Rotation of 3-person tie-off plate: 360°.
  • General construction: extruded aluminum.
  • Tubular components: 6061-T6 aluminum
  • Tie-off plates: Zinc plated steel.
  • Hardware: Grade 5 steel, zinc plated.
  • Finish: Natural aluminum or powder coated safety yellow.
  • Weight: 26 lbs (11.7 kg).

Application Restrictions

  • Inspect structure for defects prior to use. 
  • Use with Fallsoft® anchor bases.
  • Personnel must be connected with a shock absorbing lanyard or a self-retracting lifeline (SRL) with a Maximum Arrest Force (M.A.F.) rating not exceeding 900 lbs (4 kN).
  • Personnel must use a full body harness.
  • Support structure must withstand applied loads.

Images from top left:

  • GM200A Anchorage Connector mounted in a GM135CP Bolt-Down Base & anchored to existing 1" mounting studs found on Waukesha transformers (first 2 photo's).
  • GM200A Anchorage Connector mounted in a GM135 Weld-On Plate.

Brochure