Fallsoft® - Work Positioning / Base Mounting Plates

Images from top left:

  • For use on switch structures: GM1019A clamp-on deck with base receiver. Capable of clamping to beam sizes 6” to 12” high x 16” wide. Easy to install – no tools required.
  • For use on switch transformers: GM135 double pin style plate that is welded to top surface of transformer for permanent mounting.
  • For use on switch transformers: GM138 double pin style plate that is bolted to top surface of transformers.
  • For use on switch transformers: GM135CP double pin style plate that fits Waukesha Power transformers. Bolted down to existing 1" (2.5 cm) studs & may be removed after use.
  • For use on circuit breakers: GM135SC double pin style adjustable weld on plate with pipe style base for mounting on domed surfaces. The pipe style base is welded to the dome surface and then the double pin plate is adjusted to level and welded for permanent mounting.
  • For use on switch transformers: GM135CA double pin style that pins to Uni-Hoist style (UH4000-2) weld-on plate & may be removed after use.
  • For use on switch transformers: GM136 Uni-Hoist style (UH4000-2) weld-on plate that is welded to top surface of transformer for permanent mounting. Some Pennsylvania Power Transformers have the 2 mounting lugs welded to the top plate.
  • For use on switch transformers: GM158 double pin style that bolts onto the round peg adapter found on Ferranti-Packard transformers. May be removed after use.

Custom-designed mounting bases can be made available by special request.


Brochure